4/94 5.4. 102.01 nugget 30 v02 series l 266 litres/min from 10 mm body width l modular base system for din rail or surface mounting l multipole connection ?ready for use l low power solenoids with built-in led and surge suppression l ? 63 mm bore cylinder capability l internal and external pilot versions technical data medium: compressed air, ?tered to 5 m, lubricated and non-lubricated operation: spool valve, indirectly actuated mounting: through-holes in sub-base or to 35 mm din rail using modular base system port sizes: ? 4 mm or ? 6 mm interchangeable push-in connectors, m5 thread ( ? 8 mm or g 1 8 supply and exhaust) operating pressure: maximum 7 bar see individual details overleaf flow characteristics: ambient temperature: ?0?c to +50?c * consult our technical service for use below +2?c materials: entirely non-corrodible. aluminium and co-polymer bodies, aluminium spool, single base and rail bases, nitrile seals, stainless steel springs and yoke, reinforced co-polymer modular bases, nickel plated brass ?tings. size ? ? ? l/min cv kv m5 0,73 0,401 2,93 177 0,18 0,16 ? 4 mm 0,65 0,447 2,61 158 0,16 0,14 ? 6 mm 1,10 0,401 4,40 266 0,27 0,23 ordering information to order, quote model number and voltage code from tables overleaf, e.g. v025511a-b263a for a solenoid pilot actuated set-reset internal supply model ?ted with a 24v d.c. coil. order bases separately, e.g. m/p43149/4 for a 4 station rail base with m5 ports. 5/2 and 5/3 spool valves solenoid actuated ? 4, ? 6 mm or m5 14 42 12 513 5/2 5/3 all ports blocked mid- position 5/3 centre, open exhaust mid-position
nugget 30, v02 series 5.4. 102.02 4/94 general information *insert voltage code from table below. *voltage codes electrical details for solenoid operators manifolds and sub-bases voltage codes 12v d.c. (optional) 2 24v d.c. (standard) 3 voltage tolerances: ?0% rated voltage power: 1 w (24 v = 41 ma, 12 v = 83 ma) power indicator: led (red) surge suppressor: fly-wheel diode manual override: push button, spring return with locking facility insulation class: b connection: side or bottom plug connector. only one plug needed for double solenoid, common ?e* side plug electrical connection. bottom plug electrical connection. symbol model solenoid connection operator mid-position return operating pilot weight pilot pressure (bar) pressure (bar) (g) v025516a?26*a internal side plug solenoid spring and air 1,5 ?7 27,3 v025516a?24*a bottom plug v025526a?26*a external side plug solenoid spring and air ?,9 ?7 0,9 minimum 27,3 v025526a?24*a bottom plug v025511a?26*a internal side plug solenoid solenoid 1,5 ?7 40.8 v025511a?24*a bottom plug v025522a?26*a external side plug solenoid solenoid ?,9 ?7 0,9 minimum 40.8 v025522a?24*a bottom plug v025611a?26*a internal side plug solenoid all ports blocked solenoid 2 ?7 40.8 v025611a?24*a bottom plug v025622a?26*a external side plug solenoid all ports blocked solenoid ?,9 ?7 0,9 minimum 40.8 v025622a?24*a bottom plug v025711a?26*a internal side plug solenoid centre, open exhaust solenoid 2 ?7 40.8 v025711a?24*a bottom plug v025722a?26*a external side plug solenoid centre, open exhaust solenoid ?,9 ?7 0,9 minimum 40.8 v025722a?24*a bottom plug 4 2 14 12 x 513 4 2 14 12 5 1 3 84 82 4 2 14 12 x 513 4 2 14 12 5 1 3 84 82 4 2 513 12 14 x 4 2 513 12 14 84 82 4 2 1 14 x 53 12 4 2 513 14 84 12 m/p43149/1 m/p43149/2 ?12 v025516a?1308 internal pilot v025516a?1104, ? 4 mm v025516a?1204, ? 4 mm v025526a?1308 external pilot v025516a?1106, ? 6 mm v025516a?1206, ? 6 mm single station sub-base multi-station sub-base end plate sets intermediate base separator base v025516a?1402 ?q1424 v025516a?1600 m/p43165 v025516a?1700 mp/43135/1 1 metre tie rod kits blanking block (for valve islands) blanking plate (for multi-station) din mounting rail kits din rail *??sub-connector via multipole.
nugget 30, v02 series 4/94 5.4. 102.03 v025516a and v025526a models single solenoid valves v025511a, v025522a, v025611a, v025622a, v025711a and v025722a models double solenoid valves 80 32 10 38 5 81 63 38 5 32 10 81 ? ? ? ? ? 20,6 m5 15 5,5 10,5 24 18 ?,2 30,4 ?,2 5,4 4,4 36 3,3 m/p43149/2 ?12 multi-station sub-bases for valves with internal pilot supply only ? ? ? ? ? ? ? ? ? ? ? ? 4,75 4,75 39,5 516 (n x 12) + 35,5 14 14 8 19,75 12 m5 x 0,8 4,3 7,5 24,75 22,75 5 12 24 m5 x 0,8 30,5 23 11 18,4 8,5 8,5 g 1 / 8 ? ? ? these sub-bases are supplied complete with gaskets. type no. of stations m/p43149/1 1 m/p43149/2 2 m/p43149/4 4 m/p43149/6 6 m/p43149/8 8 m/p43149/10 10 m/p43149/12 12 m/p43149/1 single station sub-base for valves with internal pilot supply only n = number of stations on manifold either 3-wire plug in one side or two 2-wire plugs in both sides (1) standard side plug position. (2) standard bottom plug position. (3) alternative electrical connection position.
nugget 30, v02 series 5.4. 102.04 4/94 (n x 10,5) + 56 58,5 80 4,5 4,5 4,5 1 64 a c (n x 10,5) +56 p 1 p 2 n = number of stations 9 9 80 4,5 4,5 4,5 1 64 b model number: v025516a?1204 type: separator base complete with ? 4 mm push-in ?tings model number: v025516a?1206 type: separator base complete with ? 6 mm push-in ?tings manifolds can be assembled with dual pressure supplies. a separator base v025516a?1204 ( ? 4 mm) or v025516a?1206 ( ? 6 mm) is required, replacing one of the intermediate bases. separator bases (b) for dual supply set consists of 1 left hand and 1 right hand end plate with push-in connectors as detailed below. each end plate features an inlet connection and a common silenced exhaust. model number: v025516a?1308 type: internal pilot supply. complete with ? 8 mm push-in ?tings and pilot connection plugs. model number: v025526a?1308 type: external pilot supply. complete with ? 8 mm push-in ?tings and ? 4 mm push-in ?tings for pilot connection. end plate sets (c) tie rod kits model number: v025516a?14** type: for 2 to 24 stations **specify number of stations in manifold ? 02 to 24 modular sub-base assemblies multipole model number: v025516a?1104 type: complete with ? 4 mm push-in ?tings model number: v025516a?1106 type: complete with ? 6 mm push-in ?tings all intermediate bases are supplied with ?tings, a base seal, an intermediate seal between bases and a ?tings retaining plate. fittings cartridges are interchangeable between bases and sizes can be mixed. intermediate bases (a) multipole connection x no multipole a for 4 valves b for 8 valves c for 12 valves cylinder ports and supply to pilots 2a ? 4 mm, internal supply 2b ? 4 mm, external supply 3a ? 6 mm, internal supply 3b ? 6 mm, external supply number of stations 01 ?24 dual supply position for blanking base for simultaneous high and low pressure multipole connection x no multipole a for 4 valves b for 8 valves c for 12 valves cylinder ports and supply to pilots xx single pressure default 2a ? 4 mm, internal supply 2b ? 4 mm, external supply 3a ? 6 mm, internal supply 3b ? 6 mm, external supply number of stations 01 ?23 dual pressure xx single pressure default v02xxxxx xxxxx 01 02 03 .. .. .. .. .. .. .. 24 p 1 p 2 left right built-up modular sub-base assemblies
nugget 30, v02 series 4/94 5.4. 102.05 multipole d sub-connector harness and housing for sub-base assemblies model number: v025516a?1904 type: for up to 4 stations model number: v025516a?1908 type: for up to 8 stations model number: v025516a?1912 type: for up to 12 stations for 13 to 24 stations use one harness at each end of the manifold. for multipole connection use bottom plug versions of the valves. only pin numbers 1 ?12 are used for solenoid/spring models. harness and housing station pin number pin number wire colour number near solenoid far solenoid left centre right (com) 1 1 14 brown red green 2 2 15 orange yellow green 3 3 16 green blue green 4 4 17 purple grey green 5 5 18 white black green 6 6 19 brown red green 7 7 20 orange yellow green 8 8 21 green blue green 9 9 22 purple grey green 10 10 23 white black green 11 11 24 brown red green 12 12 25 orange yellow green multipole d sub-connector 13 12 11 10 9 8 7 6 5 4 3 2 25 24 23 22 21 20 19 18 17 16 15 14 1 a 25 ?e
common a red d sub-connector with cable pin number wire colour pin number wire colour 1 red 14 green/red 2 blue 15 yellow/red 3 green 16 white/red 4 yellow 17 red/black 5 white 18 red/brown 6 brown 19 yellow/blue 7 violet 20 white/blue 8 orange 21 blue/black 9 pink 22 orange/blue 10 turquoise 23 yellow/green 11 grey 24 white/green 12 red/blue 25 orange/green 13 black d sub-connector ribbon cable pin number wire colour pin number wire colour 1 red 2 ?25 grey model a metres v025516a?4315 1,5 v025516a?4330 3,0 v025516a?4350 5,0 model a metres v025516a?2215 1,5 v025516a?2230 3,0 v025516a?2250 5,0 13 12 11 10 9 8 7 6 5 4 3 2 25 24 23 22 21 20 19 18 17 16 15 14 1 (?e)
common 12 25 13
(12) 11 24 13
(11) 10 23 13
(10) 9 22 13
(9) 8 21 13
(8) 7 20 13
(7) 6 19 13
(6) 5 18 13
(5) 4 17 13
(4) 3 16 13
(3) 2 15 13
(2) 1 14 13
(1) station numbers type: 25 pin d sub-connector. cable size 0,22 mm 2 type: 25 pin d sub-connector. cable size 0,08 mm 2
nugget 30, v02 series 5.4. 102.06 4/94 plug connectors with clip black ?e red +ve red +ve a blue +ve black ?e common red +ve red +ve a model number: v025516a?20** type: 2-wire negative common model number: v025516a?21** type: 3-wire negative common model a v025516a?2003 300 v025516a?2010 1000 v025516a?2103 300 v025516a?2110 1000 v10175?00 connectors only (pack of 10) din mounting rail kits m4 4 20,5 5 10 model number: v025516a?1700 type: kit for modular bases to en 50022 mounting rail blanking plate blanking block model number: m/p43165 blanking plate for blocking off unwanted stations on multi-station sub-bases. model number: v025516a?1600 for blocking off unwanted intermediate base stations on modular sub-bases 26 11,5 2 accessories **complete part number from table.
nugget 30, v02 series 4/94 5.4. 102.07 fittings cartridges model number: 10x000004 ? 4 mm removable push-in ?tings cartridge model number: 10x000006 ? 6 mm removable push-in ?tings cartridge model number: 10x000008 ? 8 mm removable push-in ?tings cartridge a ? b ? c accessories model 10x000004 10x000006 10x000008 a 19,9 20,2 20,2 b 9,9 9,9 13,9 c468 warning these products are intended for use in industrial compressed air systems only. do not use these products where pressures and temperatures can exceed those listed under ?echnical data . before using these products with ?ids other than those speci?d, for non-industrial applications, life-support systems, or other applications not within published speci?ations, consult norgren martonair. through misuse, age, or malfunction, components used in ?id power systems can fail in various modes. the system designer is warned to consider the failure modes of all component parts used in ?id power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. system designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. system designers and end users are cautioned to review speci? warnings found in instruction sheets packed and shipped with these products.
|
